Protege EliteSuite Eclipse Manuel d'installation télécharger pdf (Page 13)

5.0 Programmable Output

The Protégé® EliteSuite® Eclipse LED Keypad uses a Programmable Output (PGM) that will acvate

during an alarm condion. This Output can be programmed to either:

• Follow the status of the alarm siren me or the Fire alarm seng.

• Follow the armed/disarmed status of the keypad.

Connect a relay or other interface device to this open collector output for acvaon of

ancillary devices. The behaviour of this Output can also be inverted in the programming. Refer to

theGeneralOponssecononpage23fordetailsonPGMprogramming.

The PGM Output of the Protégé® EliteSuite® Eclipse LED Keypad is designed for

a maximum current of 100mA. If using it to trigger an external siren then a relay

must be used.

LED

PGM 1

+12V

RED

BROWN

Figure 12 - LED Example

Figure 11 - Programmable Output

BROWN

BLACK

PGM 1

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 55 56

Pas de commentaire

Protege EliteSuite Eclipse Manuel d'installation Page 13